Lexmark MX71X - Skewed Print Check

Actions Yes No
Step 5
Reseat the connections on the LVPS.
Does the problem remain?
Replace the LVPS. See
“LVPS removal” on
page 445.
The problem is solved.
Skewed print check
Actions Yes No
Step 1
a Perform a print test:
Diagnostics menu > PRINT TESTS > Tray 1
b Adjust the margins if necessary:
Diagnostics menu > REGISTRATION
Does the error remain?
Go to step 2. The problem is solved.
Step 2
a Check the media source.
b If the media is from tray 1, go to step 3.
If the media is from the MPF, go to step 5.
Is the media from tray 1?
Go to step 3. If the media is from the
MPF, go to step 5.
Step 3
Make sure the pick roller tires are free of debris. Check for wear or
damage.
Are they free of wear or damage?
Go to step 4. Replace the pick roller.
See
“Pick roller
assembly removal” on
page 541.
Step 4
Check the lift plate on the media tray for damage.
Is it free of damage?
Go to step 8. Replace the media tray.
Step 5
Make sure the MPF pick roller and separator pad are free of debris. Check
for wear or damage.
Are they free of wear or damage?
Go to step 6. Replace the MPF pick
roller/separator pad.
See
“MPF pick roller
removal” on page
468.
7463
Diagnostic information
67