Sensor (input) miscellaneous jam 3 service check
Action Yes No
Step 1
Check the media size setup and tray guides for all media trays.
Does the media size in use match the size set for all media trays?
Go to step 2. Replace the media, or
change the media size
setup.
Step 2
Check the media condition in all media trays.
Is any of the media in any of the media trays crumpled or damaged?
Replace the damaged
media.
Go to step 3.
Step 3
Reset the machine.
Does the error continue?
Contact the next level
of technical support.
Problem solved.
202 paper jams
[x]‑page jam, open upper rear door. [202]
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
1 Pull down the rear door.
2 Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
7463
Diagnostic information
93
To Next Page
Loading...
