Lexmark MX71X - Paper Jam Messages

Error code Description Action
456.34 Staple, hole punch finisher: not ready to perform
priming operation
Go to
“Stapler carriage (HPU) jam service check” on
page 208.
456.35 Finisher/offset stacker: not ready to perform homing
operation
For staple finisher or offset stacker—go to
“Stapler
carriage jam service check” on page 191.
456.35 Staple, hole punch finisher: not ready to perform
homing operation
Go to
“Stapler carriage (HPU) jam service check” on
page 208.
456.83 Finisher/offset stacker: Stapler unit homing failure Go to
“Stapler carriage jam service check” on
page 191.
456.83 Staple, hole punch finisher: Stapler unit homing
failure
Go to
“Stapler carriage (HPU) jam service check” on
page 208.
456.84 Finisher/offset stacker: Stapler unit jam while stapling
—media remains detected by the home position
sensor
Go to
“Stapler carriage jam service check” on
page 191.
456.84 Staple, hole punch finisher: Stapler unit jam while
stapling—media remains detected by the home
position sensor
Go to
“Stapler carriage (HPU) jam service check” on
page 208.
456.85 Finisher/offset stacker: Stapler unit jam while stapling
—unable to return to home position
Go to
“Stapler carriage jam service check” on
page 191.
456.85 Staple, hole punch finisher: Stapler unit jam while
stapling—unable to return to home position
Go to
“Stapler carriage (HPU) jam service check” on
page 208.
456.86 Finisher/offset stacker: Stapler cartridge empty—
unable to staple
Go to
“Stapler carriage jam service check” on
page 191.
456.86 Staple, hole punch finisher: Stapler cartridge empty—
unable to staple
Go to
“Stapler carriage (HPU) jam service check” on
page 208.
457 paper jam messages
Error code Description Action
457.34 Finisher/offset stacker: Stapler not ready to perform
priming operation
Go to
“Stapler carriage jam service check” on
page 191.
457.34 Staple, hole punch finisher: Stapler not ready to
perform priming operation
Go to
“Stapler carriage (HPU) jam service check” on
page 208.
457.87 Finisher/offset stacker: Stapler failed to prime the
staple wire after a stapling operation
Go to
“Stapler carriage jam service check” on
page 191.
457.87 Staple, hole punch finisher: Stapler failed to prime the
staple wire after a stapling operation
Go to
“Stapler carriage (HPU) jam service check” on
page 208.
457.88 Finisher/offset stacker: Stapler failed to prime the
staple wire after a homing operation
Go to
“Stapler carriage jam service check” on
page 191.
457.88 Staple, hole punch finisher: Stapler failed to prime the
staple wire after a homing operation
Go to
“Stapler carriage (HPU) jam service check” on
page 208.
457.89 Finisher/offset stacker: Stapler failed to prime after a
stapling operation
Go to
“Stapler carriage jam service check” on
page 191.
7463
Diagnostic information
175