Action Yes No
Step 30
a Replace the faulty ISP option.
b POR the printer.
Does the error remain?
Go to step 31. Go to step 26.
Step 31
Contact your next level of support. You will need the following information:
• Exact 900.xx error digits and complete error message
• Printed menu settings page
• Printed network settings page
• Device error log
• A sample print file if the error appears to be isolated to a single file
• File/Application used if the error is related to specific print file
• Device operating system
• Driver used (PCL/PS)
• Frequency of the occurrence of the error
912 errors
912 error messages
Error code Description Action
912.xx Unrecoverable Engine firmware error
POR the machine. If the error re‑occurs, then update
the firmware. If the error continues occurring, then
replace the controller board.
Go to
“Controller board removal” on page 422.
94y errors
94y error messages
Error code Description Action
940.xx RIP to engine communication failure—the zero
crossing signal used for fuser control in the low voltage
(LV) power supply has failed, or the wrong low voltage
power supply has been installed.
Go to
“LVPS failure service check” on page 251.
948.xx Failed engine card—pel clock check failed.
Replace the controller board.
Go to
“Controller board removal” on page 422.
949.xx Failed engine card—delay line calibration failure.
Replace the controller board.
7463
Diagnostic information
264
To Next Page
Loading...
