Lexmark MX71X - Page 84

Error code Description Action
200.12 Printhead was not ready for the page when
the sensor (input) was reached.
Go to
“Printhead motor control jam service check” on
page 90.
200.13 The page at the sensor (input) is not the next
page to be imaged.
Go to
“Sensor (input) miscellaneous jam 1 service check” on
page 92.
200.14 Proper main motor feedback to start laser
servo was not received.
Go to
“Main drive motor control jam service check” on
page 90.
200.15 Media reached the sensor (input) but did not
clear it within the specified time. (Media
source = Tray 1)
Go to
“Sensor (input) late-leaving or did-not-clear jam service
check” on page 88.
200.16 Main drive motor stalled. Go to
“Main drive motor control jam service check” on
page 90.
200.17 Fuser motor stalled. Go to
“Fuser drive motor control jam service check” on
page 91.
200.19 Paper never reached the sensor (input), but
it was successfully picked from the source.
Go to
“Sensor (input) miscellaneous jam 1 service check” on
page 92.
200.25 Media reached the sensor (input) but did not
clear it within the specified time. (Media
source = Tray 2)
Go to
“Sensor (input) late-leaving or did-not-clear jam service
check” on page 88.
200.32 Detected sensor (control panel interlock)
bounce.
Go to
“Sensor (input) miscellaneous jam 2 service check” on
page 92.
200.33 Printhead was not ready for page when
sensor (input) was reached.
Go to
“Printhead motor control jam service check” on
page 90.
200.34 Short media detected. Go to
“Sensor (input) miscellaneous jam 3 service check” on
page 93.
200.35 Media reached the sensor (input) but did not
clear it within the specified time. (Media
source = Tray 3)
Go to
“Sensor (input) late-leaving or did-not-clear jam service
check” on page 88.
200.45 Media reached the sensor (input), but did not
clear it within the specified time. (Media
source = Tray 4)
Go to
“Sensor (input) late-leaving or did-not-clear jam service
check” on page 88.
201.22 Toner add motor stalled. Go to
“Toner add error service check” on page 243.
7463
Diagnostic information
84