Move, Copy and Delete
There are three functions that I would like to show you. They are general functions that works on many things, but
now is the right time to tell you about them.
Move
You can move the groups around so they are positioned where you like them.
Press Move and then press the All Dimmers group. Now press on an empty group button. This moved the group
to this new location. Now press Move again and then All Dimmers and then All FOH . This doesn't move
anything yet. We have now selected to move two groups and the console is waiting for a new location. Press
somewhere that have two free buttons. We just moved the two groups next to each other at the new location.
Copy
You can also copy a group. Then you have two identical groups.
Press Copy and then All Dimmers followed by an empty group button. We have now created a new group. The
content is exactly the same as the 'All Dimmers' group. The name ends with a "#2" so the two groups can still be
distinguished. The two groups are not connected. If you change the content in one group, then the other is still
untouched.
Delete
You can delete a group by pressing Delete and then the group you want to delete. Remember this doesn't affect
any cues.
Let's make more groups
Ok, let's make some more groups. All the odd numbered fixture in our plot have a warm colored gell and all the
even numbered have a cold color.
You know everything needed to create these groups, so I'll just list all the groups needed in a table form:
Number: Fixtures: Name:
1 1 to 12 All Dimmers
2 1 to 4 All FOH
3 5 to 12 All Stage
4 5 to 8 Down Stage
5 9 to 12 Up Stage
6 1 + 2 + 5 + 6 + 9 + 10 Stage Right
7 3 + 4 + 7 + 8 + 11 + 12 Stage Left
8 1 + 3 + 5 + 7 + 9 + 11 All Warm Dim
9 2 + 4 + 6 + 8 + 10 + 12 All Cold Dim
To Next Page
Loading...
Need help?
General