7.30. Group Command
This page describes the syntax and how to use the group command.
To go to the group command, press Group on the console.
Description
With the group command you select a group from the groups pool.
All fixtures stored in the group are selected in the fixtures view.
The order of the selected fixtures is the same order as you select the fixtures and stored them in a group.
Syntax
Select a group in the groups pool along with the stored fixtures in it.
Group 1
Example
Let´s assume, you will select all stored fixtures in group 1.
There a two ways to do this.
a) Tap at group 1 in the groups pool.
b) Press Group 1 Please .
All fixtures stored in group 1 are selected in the fixtures view.
Related Links
Group Key
Groups Pool
7.31. Help Command
To Next Page
Loading...
Need help?
General