MAINTENANCE AN D SERVICING
• Be prepared if an accident should occur. Know where
the first aid kits a nd fire extinguishers are located, and
know how to use them.
Figure 4.4: Safety Equipment
• Keep the service area clean and dry. Wet or oily floors
are slippery. Wet spots can be dangerous when working
with electrical equipment. Be sure all electrical outlets
and tools are properly grounded.
Figure 4.5: Safety Around Equipment
• Use adequate light for the job at hand.
• Replace all shields removed or opened for service.
• Use only service and repair parts made or approved by
the equipment manufacturer. Substituted parts may not
meet strength, design, or safety requirements.
• Keep machinery clean. Never use gasoline, naphtha,
or any volatile material for cleaning purposes. These
materials may be toxic and/or flammable.
147910 109 Revision A
To Next Page
Loading...
