MacDon R113 - Break in Inspections

MAINTENANCE AN D SERVICING
▲
Mower conditioner drive gearbox lube (first
50 and then every 250 hours) - Refer to
4.5.10 Mower Conditioner Drive G earbox
(T-Gearbox) (MD #224211), page 211
▲
Driveline g
earboxes (4) lube (first 50 and then
every 250 ho
urs) - Refer to 4.5.11 Swivel
Gearbox, pa
ge 216
250 Hours
▲
Cutterbar
lube - Refer to Checking Lubricant
Level, pag
e 127
▲
Roll conditioner drive gearbox - Refer to 4.5.9
Conditioner Drive Gearbox (MD #221748),
page 209
▲
Mower conditioner drive gearbox lube - Refer
to 4.5.10 Mower Conditioner Drive Gearbox
(T-Gearbox) (MD #224211), page 211
▲
Drive
line gearboxes (4) lube - Refer to 4. 5.11
Swive
l Gearbox, page 216
4.3.2 Break In Inspections
Tabl
e 4.1 Break In Inspection Schedule
Insp
ection
Int
erval
Item Refer to
1
Hour
Wheel bolts
Checking Wheel Bolts, page 218
Che
ck for loose hardware and
ti
ghten to required torque
7.2
Torque Specifications, page 260
5
Hours
Check drive belt tension Inspecting Conditioner Drive Belt, page 205
Check drive belt tension Inspecting Conditioner Drive Belt, page 205
25
Ho
urs
C
heck driveline taper pin torque 4.5.6 Inspecting Driveline Taper Pins, page 200
147910 113 Revision A