MacDon R113 - Finger Conditioner; Inspecting Finger Conditioner

MAINTENANCE AN D SERVICING
5. Inspect right side roll conditioner U-joints (A) for signs
of wear or damage.
Figure 4.250: Right Side Roll
Conditioner U-Joints
6. Inspect right side roll conditioner gearbox bearings (A)
for signs of wear or damage.
Figure 4.251: Right Side Roll Conditioner
Gearbox Bearings
4.9.2 Finger Conditioner
Inspecting Finger Conditione r
DANGER
To avoid bodily injury or death from unexpected start-up or fall of a raised machine, stop engine, remove
key, and engage header lift cylinder lock-out valves before going under machine for any reason.
CAUTION
Exercise caution when working around the blades. Blades are sharp and can cause serious injury. Wear
gloves when handling blades.
147910 229 Revision A