OPERATION
Converting from Field t o Transport Mod e
DANGER
Do not convert the machine into, or from, transport mode until you are certain that all people, animals, and
objects are clear of the unit’s rotational range.
DANGER
Stop the power take-off (PTO) before converting the unit into transport mode. The cutting discs continue
to spin after the drive is turned off.
WARNING
Ensure cutterbar doors are properly closed before converting the machine from field to transport mode to
prevent equipment damage.
1. Start tractor if not running. Do NOT operate the
mower conditioner.
2. Following the field to tran sp o rt decal (A), move
transport switch to the lower position (C) and ensure
that light (B) is illuminated.
Figure 3.79: Remote Control
147910 73 Revision A
To Next Page
Loading...
