MAINTENANCE AND SERVICING
8. Install two M10 bolts (A) and washers. Torque to
40 ft·lbf (55 N·m).
NOTE:
Inspect bolt threads and replace if damaged.
Figure 4.138: Cutterbar Spindle
9. Install retaining ring (A).
Figure 4.139: Cutterbar Spindle
10. Install cutterbar disc ( A), ref er to Installing Cutterbar
Discs, page 132.
11. Install driven rotary deflector (B), refer to Installing
Driven Rotary Deflectors and Driveline, page 168.
12. Install non driven rot ary deflector (C), refer to Installing
Non-Driven Rotary Deflectors, page 173.
WARNI
NG
Ensure cutterbar is completely clear of foreign
objects. Foreign objects can be ejected with
considerable force when the machine is started and
may result in serious injury or machine damage.
Figure 4.140: Cutterbar Disc Assemblies
147910 180 Revision A
To Next Page
Loading...
