PRODUCT OVERVIEW
ORFS
O-ring face seal: A style of fitting commonly used for connecting
hoses and tubes. This style of fitting also is commonly called ORS,
which stands for O-ring seal.
PTO Power take-o
ff
Road Friendly Transport system
Kit available as a Dealer installed option that allows the mower
conditioner to be towed on roadways while remaining within the legal
width restrictions on most roads and highways
Rotary mower conditioner
The part of
the mower conditioner that cuts and conditions the crop.
rpm
Revolutions per minute
RoHS
Reductio
n of hazardous substances: a directive of the European
Uniontor
estrict the use of certain hazardous substanc es (such as
hexavale
nt chromium used in some yellow zinc platings).
SAE Society of Automotive Engineers
Screw
A headed and externally threaded fastener that threads into
preformed threads or forms its own thread in one of the mating parts.
Soft jo
int
Ajoint
made u sin g a fastener where the jo inin g m aterials are
compr
essible or experience a relaxation period over time.
Tension
An axial load placed on a bolt or screw, usually measured in pounds
(lb) or Newtons (N)
TFFT
Turn
sfromfinger tight
Tor q u e
The product of a force X lever arm length, usually measured in
foot-pounds (ft·lbf) or Newton-meters (N·m).
Torque angle
A tightening procedure where the fitting is assembled to a
precondition (finger tight) and then the nut is turned further a number
of degrees or a number of flats to achie ve its final position.
Torque-tension
Th
e relationship between the assembly torque applied to a piece of
h
ardware and the axial load it induces in the bolt or s crew.
Tractor Agricultural type tractor.
Truck
A
four-wheel highway/road vehicle weighing no less than 7,500 lb
(
3,400 kg).
Washer
A thin cylinder with a hole or slot located in the center and is to be
used as a spacer, load distribution element, or a locking mechanism.
147910
24
Revision A
To Next Page
Loading...
