Mazda Mazda6 - Page 103

CONTROL SYSTEM
F1–15
F1
Output Device
×:Applied
—: Not applied
* : For L3 engine only
End Of Sie
Item Signal
Mazda6 (GG, GY)
Remark for new model
4WD ATX
Unleaded
(RON 90
or above)
Current
model
IAC valve IAC × Same as current model
VIC solenoid valve* VIC × — × Same as current model
Variable tumble control
solenoid valve
VTCS × Same as current model
Oil control valve (OCV)*
Variable valve
timing control
× — × Same as current model
Fuel injector
Fuel injection
control
× Same as current model
Fuel pump relay
Fuel pump
control
× Same as current model
Ignition coil ESA control × Same as current model
EGR valve EGR control × Same as current model
Purge solenoid valve Purge control ×
Same as current model
BARO factor for Purge control has been
eliminated.
Heated oxygen sensor
heater
(Front, rear)
O2S heater
control
× Same as current model
Field coil
(Generator terminal D)
Generator
control
× Same as current model
Cooling fan relay
Electric fan
control
× Same as current model
A/C relay
A/C cut-off
control
× Same as current model
Controller area network
(CAN)
Information
function
×
Same as current model
TCM (ATX) information have been
adopted for 4WD ATX model.