Mazda Mazda6 - After Repair Procedure; Koeo;Koer Self-Test Procedure

F2–86
ON-BOARD DIAGNOSTIC
KOEO/KOER SELF-TEST PROCEDURE
A6E407018881208
1. Connect the WDS or equivalent to the vehicle
DLC-2 16-pin connector.
2. Perform KOEO/KOER self-test.
End Of Sie
AFTER REPAIR PROCEDURE
A6E407018881209
1. Connect the WDS or equivalent to the vehicle
DLC-2 16-pin connector.
2. Turn the engine switch to ON.
3. Record DTC if retrieved.
4. Erase all diagnostic data using WDS or
equivalent.
DLC-2
A6E40702001
DLC-2
A6E40702001