Mazda Mazda6 - Cooling Fan Motor Removal;Installation; Fan Motor

E–12
FAN MOTOR
COOLING FAN MOTOR REMOVAL/INSTALLATION
A6E362215025201
MZR-CD (RF Turbo)
1. Remove the cooling fan component.
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
4.
End Of Sie
FAN MOTOR
4
3
1
2
2.9—3.9 N·m
{29.5—39.8 kgf·cm,
25.6—33.9 in·lbf}
3.9—4.9 N·m
{39.7—50.0 kgf·cm,
34.7—43.4 in·lbf}
3.9—4.9 N·m
{39.7—50.0 kgf·cm,
34.7—43.4 in·lbf}
A6E3621W101
1 Cooling fan No.2
2 Cooling fan No.1
3 Cooling fan motor No.2
4 Cooling fan motor No.1