Mazda Mazda6 - Features; Outline; Specifications

OUTLINE
K2–3
K2
FEATURES
A6E570201030201
ATX
Improved marketability
• New JA5AX-EL automatic transaxle for 4WD is used with on L3 engine.
Improved shift quality
• Five speed automatic transaxle has been adopted.
• The feedback control system has been adopted.
• The centrifugal balance clutch chambers have been adopted.
• A plate-type clutch pack replaces the band brake in the 2-4 brake.
High efficiency, compactness, and light weight
• Miniature trochoid gear type oil pump with torque converter direct drive has been adopted.
End Of Sie
SPECIFICATIONS
A6E570201030202
OUTLINE
Item
New Mazda6 (GY) Current MPV (LW)
–
For General
(R.H.D.)
specs.
Except for
General
(R.H.D.)
specs.
Transaxle type JA5AX-EL JA5A-EL
Gear ratio
1GR 3.801
2GR 2.131
3GR 1.364
4GR 0.935
5GR (O/D) 0.685
Reverse 2.970
Final gear ratio 3.491 3.290 3.491
ATF
Type
ATF M-III or equivalent (e.g. Dexron
®
III)
Capacity (approximate quantity)
(L {US qt, Imp qt})
8.3 {8.8, 7.3} 9.7 {10.3, 8.5}
Torque converter stall torque ratio 1.86:1
Hydraulic system (Number of
drive/driven plates)
Low clutch 6/6 7/7
2-4 brake 3/4
High clutch 5/5
Direct clutch 3/5 4/4
Reverse clutch 2/2
Low and reverse brake 6/5
Band servo (mm {in})
Reduction accumulator piston outer
dia./reduction band servo piston
outer dia.
49.66/57.64
Number of front planetary gear
teeth
Ring gear 74
Sun gear 34
Pinion gear 20
Number of rear planetary gear
teeth
Ring gear 75
Sun gear 42
Pinion gear 17
Number of reduction planetary
gear teeth
Ring gear 85
Sun gear 31
Pinion gear 27
Number of output gear teeth 41
Number of idler gear teeth 47
Number of reduction gear teeth 22 23 22
Number of ring gear teeth 67 66 67
Transfer oil
Type
SAE 80W-90
API Service GL-5
–
Capacity (approximate quantity)
(L {US qt, Imp qt})
0.62 {0.66, 0.55} –