PROPELLER SHAFT
L–7
L
Propeller Shaft Installation Note
1. Align the mark made during removal, and install the propeller shaft.
Front side
2. Installing a new propeller shaft, align the
differential companion flange precast marking
with the tag on the propeller shaft.
End Of Sie
PROPELLER SHAFT DISASSEMBLY/ASSEMBLY
A6E611025002202
Caution
• To prevent damage to parts when using a clamp, be sure to place an aluminum plate between
parts and the clamp.
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
A6J6110W006
MARK
TAG
A6E6110W002
To Next Page