DRIVE SHAFT
M–5
M
DRIVE SHAFT OUTLINE
A6E631625500201
Features
Improved drivability, reduced noise and vibration
• Concurrent with the MZR-CD (RF Turbo) engine and 4WD system, the configuration of the front drive shaft and
the joint shaft has been optimized.
• For 4WD models, a constant velocity joint system has been adopted for the rear drive shaft.
End Of Sie
STRUCTURAL VIEW
A6E631625500202
.
End Of Sie
REAR DRIVE SHAFT
A6E631625500203
Structure
• Engine noise and vibration have been reduced due to adoption of a bell joint on the wheel side of the constant
velocity joint.
• A low noise and vibration double offset joint with low slide resistance has been adopted for the differential side
of the constant velocity joint. Due to this booming resonance at high speed is reduced.
• An extremely durable plastic has been adopted for the wheel side boot.
.
DRIVE SHAFT
3
1
2
A6E63162101
1 Front drive shaft
2 Joint shaft
3 Rear drive shaft
5
4
3
1
2
A6E63162102
1 Wheel side
2 Bell joint
3 Differential side
4 Double offset joint
5 Plastic boot
To Next Page