N–6
ENGINE SPEED SENSING POWER STEERING
POWER STEERING FLUID INSPECTION
A6E661432040201
Fluid Level Inspection
1. Inspect the power steering fluid level.
• Add fluid to the specified level as necessary.
Fluid specification
ATF M-III or equivalent (e.g. Dexron
®
II)
Fluid Leakage Inspection
Caution
• If the steering wheel is kept in the fully turned position for more than 5 seconds, the fluid
temperature will rise excessively and adversely affect the oil pump.
1. Start the engine and let it idle.
2. Turn the steering wheel fully to the left and right to apply fluid pressure.
Note
• The points where fluid leakage may occur are indicated in the figure.
3. Inspect for fluid leakage.
• If fluid leakage is found, replace the related pipe or hose.
ENGINE SPEED SENSING POWER STEERING
L.H.D.
ATX
MTX
R.H.D.
ATX
MTX
MZR-CD (RF Turbo)
EXCEPT MZR-CD (RF Turbo)
L.H.D
R.H.D
A6E66142001
To Next Page