5. Remove the M5 screw from the Mag-Pin assembly.
M5 screws
Extraction Method 1:
a) Place the extraction tool EXTOOL13A on top of the valve pin holder.
b) Couple the extraction tool with the M8 screw and M8 washer and
extract the Mag-Pin assembly.
1. M8 screw
2. EXTOOL13A
3. M6 screw
Mag-Pin Extraction - continued
3
2
1
14-13MAG-PIN OPTION
Hot Runner User Manual
© 2020 Mold-Masters (2007) Limited. All Rights Reserved.
To Next Page
