Mold-Masters Hot Runner - 15.4 Heater Plate Power Lead Removal

Table 15-3 Crimping Tool Chart
Product Name Description
PUNCHHANDLE01 Ratchet tool for securing crimp to terminal end
assemblies
CRIMPDIE01 4.0mm Heater Element
(Mates with CRIMPPUNCH01)
CRIMPPUNCH01 4.0mm Heater Element
(Mates with CRIMPDIE01)
CRIMPDIE02 2.5 - 3.0mm Heater Element
(Mates with CRIMPPUNCH02)
CRIMPPUNCH02 2.5 - 3.0mm Heater Element
(Mates with CRIMPDIE02)
CRIMPDIE03 1.8 - 2.0mm Heater Element
(Mates with CRIMPPUNCH03)
CRIMPPUNCH03 1.8 - 2.0mm Heater Element
(Mates with CRIMPDIE03)
CRIMPREMOVEB01 Bottom Crimp Removal Insert for shearing HE
crimps
(Mates with CRIMPREMOVET01)
CRIMPREMOVET01 Top Crimp Removal Insert for shearing HE
crimps
(Mates with CRIMPREMOVEB01)
15.4 Heater Plate Power Lead Removal
1. Remove the set screws.
2. Slide ceramic sleeve o󰀨.
3. Remove the power leads using crimp removal tool.
Figure 15-7 Terminal end assembly
1
3
4
2
1. Power leads
2. Set screws
3. Ceramic sleeve
4. Heater plate
Terminal Assembly - continued
15-11MAINTENANCE
Hot Runner User Manual
© 2020 Mold-Masters (2007) Limited. All Rights Reserved.