Extraction Method 2:
a) Place the extraction tool EXTOOL13A on top of the valve pin holder.
b) Couple the extraction tool EXTOOLAS10 with EXTOOL13B and
extract the Mag-Pin assembly.
1. EXTOOL13B
2. EXTOOL13A
If the valve pin gets stuck in the mechanism or if it detaches from the magnet
interface, choose one of the methods that follow:
a) Method 1: Extract the valve pin and holder with a M5 screw or other
adaptor with a M5 thread in front.
M5 screw
Mag-Pin Extraction - continued
2
1
14-14
© 2020 Mold-Masters (2007) Limited. All Rights Reserved.
MAG-PIN OPTION
Hot Runner User Manual
To Next Page
