___________________________________________________________________________________
5 - 30 Installing KSUs
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
2. Connect the external batteries to the KSU in the
location shown in Figure 5-31 Connecting the
External Battery to the Basic KSU. Connect the
external battery cable to the EXT connector on the
PSU of the Basic KSU. Bundle any extra cabling
together.
3. Route the cables through the clamps on the KSU as
shown in Figure 5-32 Threading Cables through
Clamps on the Basic KSU.
Figure 5-31 Connecting the External
Battery to the Basic KSU