NEC ELECTRA ELITE IPK II - Page 123

Electra Elite IPK II Document Revision 3
System Hardware Manual 5 - 35
___________________________________________________________________________________
___________________________________________________________________________________
4. Before putting the covers on the Basic and
Expansion KSUs, remove the knockouts (indicated
by the arrows). On the Basic KSU, knockouts must
be removed from the top and the bottom of the KSU
cover. On the Expansion KSU, only the bottom
knockout is removed. Refer to Figure 5-37
Removing the Knockouts on the Covers of Basic
and Expansion KSUs.
Figure 5-37 Removing the Knockouts on the Covers
of Basic and Expansion KSUs