___________________________________________________________________________________
6 - 118 Installing ETUs (Circuit Cards)
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
CH7 Port Status Busy Not Used Idle/Not
Used
CH8 Port Status Busy Not Used Idle/Not
Used
MB MB Switch Status ON Not Used OFF
BIOS DOS Status BIOS Error Not Used No error
BCLR Application Status Red: DOS
started
(VM Not
Ready)
Green: VM
Running
Orange: Error
Not Used Idle
When BCLR LED is orange, check error type on console
screen. After error is corrected, LED automatically changes to
green. Do Not connect link between console and ETU until
BCLR turns green during booting.
HD Flash Status Not Used Compact
Flash Disk
Active
Flash
Inactive
Do not reset the ETU while the HD LED is flashing.
Table 6-41 FMS-U30 ETU LED Indications
LED Name Description
LED 1 APP1 Indicates status of voice mail application software:
Green: Application running without errors.
Amber: Application running with errors.
Red: Application not running.
LED 2 APP 2 Not Used
LED 3 Drive HDD active light is red when the hard drive is
accessed.
Do not reset the ETU while this switch is
on.
LED 4 CF Power On when SHUTDOWN switch is in RUN to indicate
power on the ETU.
Table 6-40 FMS(2)/(4)/(8)-U( ) ETU LED Indications (Continued)
LED Description On Flashing Off
To Next Page
Loading...
