NEC ELECTRA ELITE IPK II - Page 316

___________________________________________________________________________________
6 - 174 Installing ETUs (Circuit Cards)
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
8.9.6 Connectors
The following connectors are included:
J J2 Connects to the backplane.
J J8 Connects to Hard Disk memory.
J J9 RJ45 LAN connector for network connection
J J11 9-pin RS232 local serial connector for direct
connection
J J12 Port expansion connector for DSP-U( ) module
J7 Setting
Pin 1 to Pin 2 Not Used
Pin 2 to Pin 3 Hard Drive is master drive (default)