NEC ELECTRA ELITE IPK II - Page 443

Electra Elite IPK II Document Revision 3
System Hardware Manual 9 - 37
___________________________________________________________________________________
___________________________________________________________________________________
13. Press 9 from the Programming Menu to access Advanced
Settings
option.
14. Select
3, DRS Settings.
15. Select 1, DRS Mode, and Disable this function.
 This function must be Disabled prior to saving the
configuration.
16. Select Save; the system stores the new configuration and
performs a software reset.
17. After the unit performs the software reset, the IP-R Unit
searches for the MGC. After the unit locates the MGC, the
terminal LCD restores the system time and the softkeys for
System, Station, Up, and Down are restored.
18. The ITH 8D/16D-2 Telephone or the IP-R Unit installed is now
ready for operation.