NEC ELECTRA ELITE IPK II - Page 506

___________________________________________________________________________________
11 - 2 Installing Electra Elite Optional Terminal Equipment
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
3. Insert a flat head screwdriver into A in Figure 11-2 Unlocking Tab and press
straight down until tab unlocks.
4. Lightly press the right side of leg shown as B in Figure 11-3 Releasing Right
Tab, insert a flat head screwdriver at C. Press straight down until other tab
unlocks.
Figure 11-1 Raising the Base Plate
Figure 11-2 Unlocking Tab