___________________________________________________________________________________
13 - 24 Installing Cordless and Wireless Telephones
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
5. Place the base unit on the posts of the wall screws and push down until
it is firmly seated.
6. Plug the other end of the short telephone cord in a telephone wall jack.
7. Plug the AC adapter in a standard 120 Vac wall outlet. Refer to Figure
13-18 Plugging the AC Adapter into the AC Wall Outlet on page 13-22.
Do not use an outlet controlled by a wall switch.
Figure 13-20 Placing the Telephone Cords in the Wall Mount Stand
Figure 13-21 Attaching the Wall Mount Unit to the Wall
To Next Page
Loading...
