4
Scan to E-Mail
4-12 VarioLink 2221/2821/3621
5 Touch [PC], [E-Mail], then [Enter].
– If mode 476 of the software
switch settings was changed,
only communication modes that
can be selected appear. For
details, refer to "Specifying
software switch settings
(machine functions)" on
page 10-28.
6 Type in the destination address.
– To change an entered address,
press the [C] (clear) key, and then
enter a new address.
– If parts of frequently used
addresses are registered, they
can be quickly entered by
touching [Domain]. For details,
refer to "Registering a domain
name" on page 3-52.
7 To select the file format and
encoding method, touch [Scan
Mode].
8 Specify the Quality & Reduction
settings for the original document to
be sent.
– For details, refer to "Specifying
the scanning quality and zoom
ratio" on page 4-14.
To Next Page
Loading...
