Oce VarioLink 2221 - Specifying the Processing of Documents Received on Other Lines

Specifying management settings
10
VarioLink 2221/2821/3621 10-25
Specifying the processing of documents received on other lines
You can specify the processing method for documents received on lines
other than a port.
The following settings can be specified.
2
Note
If bit 7 of mode 306 is set to "1" in the Soft SW Setting screen, only "Port"
is available. For details, refer to "Specifying software switch settings
(machine functions)" on page 10-28.
Item Description
RX Doc. Settings When "Distribution Conditions" is set to "Specified", select the
processing method for the received document.
Print: Prints the document.
Forward: Forwards the data to the specified destination.
Print and Forward: Prints the document and at the same time
forwards the data to the specified destination.
Memory RX: Receives the memory by force.
Forwarding Dest Specify the forwarding destination if "Forward" is selected in the
Setting of RX Doc. screen.
Touch [Next Destination], touch the button for the recipient’s
address, and then touch [Enter].