Oce VarioLink 2221 - Specifying Whether to Add the Transmission Source Information When Faxing or When Forwarding Received Documents (Mode 352)

10
Specifying management settings
10-38 VarioLink 2221/2821/3621
Specifying whether to add the transmission source information when
faxing or when forwarding received documents (mode 352)
You can specify how the transmission source information is added when
faxing directly and when forwarding received documents.
Factory settings
Specifying settings
The shaded cells represent the factory settings. The page numbers on the
right refer to the descriptions of the corresponding functions.
Bit 7 6 5 4 3 2 1 0
Setting 1 1 0 1 0 0 0 0 (HEX: D0)
Bit Description Status Description Page
Refer-
ence
7, 6 -----------------------------
11 *Do not change this bit when
specifying settings for this
function.
---------
5 Specifies whether transmis-
sion source information is
added when forwarding re-
ceived documents.
0 Not added page 10-
5
1Added
4 Specifies how transmission
source information is added
when forwarding received
documents.
0 Outside body text ---------
1 Inside body text
3, 2, 1, 0 -----------------------------
0000 *Do not change these bits
when specifying settings for
this function.
---------