Oce VarioLink 2221 - Specifying Settings to Limit the Use of Communication Modes-2 (Mode 476)

Specifying management settings
10
VarioLink 2221/2821/3621 10-55
Specifying settings to limit the use of communication modes-2
(mode 476)
Specify whether to permit or prohibit the use of individual communication
modes. Prohibited communication modes do not appear in their selection
screens.
2
Note
Programmed one-touch dial buttons can be used for transmission even
if a prohibited communication mode has been specified.
If all communication modes are prohibited (modes 475 to 477), some
screens, such as those for specifying transmission settings, may not
normally be displayed.
Factory settings
Bit 7 6 5 4 3 2 1 0
Setting 0 0 0 0 0 0 0 0 (HEX: 00)