Oce VarioLink 2221 - Changing the Settings for a One-Touch Dial Destination

Specifying settings using Web Connection
9
VarioLink 2221/2821/3621 9-29
Changing the settings for a one-touch dial destination
1 Click the Scan tab.
– If the optional fax kit has been installed, click the Fax/Scan tab.
2 Click [One-Touch Key Registration].
3 From the "Index" list, click the index that contains the one-touch dial
destination that is to be changed.
The one-touch dial destinations saved in the selected index appear in
the lower half of the page.
4 Click the one-touch dial destination whose settings are to be changed.
– A one-touch dial button programmed as an administrator
forwarding destination cannot be selected.
?
Are there one-touch dial destinations that cannot be selected even
if they are clicked?
% A fax program cannot be selected, even if it is clicked.