Oce VarioLink 2221 - Changing or Deleting a One-Touch Dial Button

Internet faxing
7
VarioLink 2221/2821/3621 7-37
Changing or deleting a one-touch dial button
1 Perform steps 1 through 4 of the procedure in "To program a one-
touch dial button".
2 Touch the one-touch dial button to
be changed or deleted.
– If the specified one-touch dial
button is programmed as an
administrator forwarding
destination, the screen for
entering the administrator
number appears.
3 Touch the button for the information
to be changed, and then make the
change.
– To delete the information, touch
[Delete].
4 Check the information to be registered, and then touch [Enter].
5 Touch [Enter] until the initial screen appears.