10
Specifying management settings
10-16 VarioLink 2221/2821/3621
To print manually
Use the following procedure to print outside of the specified time.
1 Press the [Utility/Counter] key.
2 Touch [User Management].
3 Touch [Memory RX ON/OFF].
4 If the Memory Lock Password setting
was specified, type in the password
using the keypad, and then touch
[Enter].
5 Select [Lock OFF], and then touch
[Enter].
– To stop printing in the middle of a
print job, touch [Lock ON], and
then touch [Enter].
– To restart a stopped print job,
touch [Temporarily Print].
6 Touch [Enter] until the initial screen appears.
To Next Page
Loading...
