Oce VarioLink 2221 - Changing;Deleting a Mail Program

Scan to E-Mail
4
VarioLink 2221/2821/3621 4-45
Changing/deleting a mail program
1 Perform steps 1 through 4 of the procedure in "To program a one-
touch dial button".
2 Touch the one-touch dial button with
the mail program to be changed or
deleted.
– Touch an Index tab or [Index
List], then the desired one-touch
dial button.
3 Touch the button for the setting to be
changed, and then change the
setting. To delete the mail program,
touch [Delete].
4 Check the information to be registered, and then touch [Enter].
5 Touch [Enter] until the initial screen appears.