Setup
3
VarioLink 2221/2821/3621 3-57
If user authentication settings have been specified
Contact the administrator for the user name and password to be used.
1 Touch [User Name], type in the user
name, and then touch [Enter].
– If user authentication is
performed with an external server
and a domain other than the
default domain name is used as
an Active Directory, type in the
user name as
"user_name@domain_name".
– If user authentication is performed with an external server, select
the domain for performing authentication with Active Directory.
2 Touch [Password], type in the
password, and then touch [Enter].
3 Touch [Login] or press the [Access] key in the control panel.
The initial screen appears.
To Next Page
Loading...
