Specifying management settings
10
VarioLink 2221/2821/3621 10-5
10.2 Registering transmission source names
When sending Internet faxes, the text of the transmission source entered can
be printed. You can register the transmission source name.
The transmission source name can be used with the following operations.
Note
Up to 8 transmission source names can be registered. Since multiple
transmission sources can be registered, the names for each destination
and track can be used separately.
Transmission source names of up to 40 characters can be registered.
To register a transmission source name
1 Enter Administrator mode, and then touch [Admin. 1].
2 Touch [Initial Setting].
3 Touch [TSI Registration].
Item Description
Internet fax Prints the name of the transmission source at the top of the
page.
To Next Page
Loading...
