Oce VarioLink 2221 - Com. Mode

Specifying settings using Web Connection
9
VarioLink 2221/2821/3621 9-51
Com. Mode
Select whether or not each communication mode can be used.
1 In the Administrator mode, click the Scan tab.
– If the optional fax kit has been installed, click the Fax/Scan tab.
2 Click [TX Settings].
3 Click [Com. Mode].
4 Specify a setting for each parameter, and then click [Apply].
– If mode 476 of the software switch settings was changed, only
communication modes that can be selected appear. For details,
refer to "Specifying software switch settings (machine functions)"
on page 10-28.
2
Note
The communication modes that can be set differ depending on the
options that are installed.