Internet faxing
7
VarioLink 2221/2821/3621 7-39
Registering/deleting a secondary destination
0 A secondary recipient can be specified if the optional scanner unit or fax
kit is installed.
1 Perform steps 1 through 9 of the procedure in "To program a one-
touch dial button".
2 Touch the one-touch dial button where the secondary destination is to
be registered.
3 Touch [One-Touch], then [Sub
Address Registration].
4 Select the communication mode for
the secondary destination.
– If mode 476 of the software
switch settings was changed,
only communication modes that
can be selected appear. For
details, refer to "Specifying
software switch settings
(machine functions)" on
page 10-28.
5 Enter the secondary destination
information, and then touch [Enter].
6 Touch [Enter] until the initial screen appears.
To Next Page
Loading...
