Scan to FTP
5
VarioLink 2221/2821/3621 5-23
Resending
You can resend up to 20 failed transmission.
1 Touch [Job List], then [Type], and then select the document that could
not be sent.
– If [Retry] and [Change Destination] appear in the screen, the
document does not need to be scanned again.
2 To send to the same destination, touch [Retry].
– To send to a different destination, touch [Change Destination].
4 Transmission result Shows the transmission result. Any of the
following may appear.
OK: The transmission was completed suc-
cessfully.
INTERR: The transmission was interrupted.
F. MEM: The memory capacity was exceed-
ed.
NG: The transmission failed.
PT. DEL: The transmission to some destina-
tions failed.
Error code: For details, refer to "Network er-
ror list" on page 12-4.
5 Transmission Image Prints a part of the sent image.
No. Item Description
To Next Page
Loading...
