Oce VarioLink 2221 - Specifying the Transmission Report Printing Conditions; To Specify the Transmission Report Printing Conditions

Scan to E-Mail
4
VarioLink 2221/2821/3621 4-19
Specifying the transmission report printing conditions
You can specify the conditions for printing a transmission report (TX Report).
The printing conditions for a transmission report are preset with the Report
Settings parameters from the Administrator Management screen. Select the
appropriate printing condition.
Settings can be specified for the following.
To specify the transmission report printing conditions
1 Touch [Menu].
– If the optional fax kit has been
installed, touch [FAX Menu].
2 Touch [Setting 1], then [TX Report].
– If the optional fax kit has been
installed, touch [Set 1], then [TX
Report].
Item Description
Default Displays the printing conditions specified in Administrator Management
screen.
ON Prints regardless of the results.
If TX Fails Prints when the transmission failed.
OFF Does not print regardless of the results.