9
Specifying settings using Web Connection
9-62 VarioLink 2221/2821/3621
9.13 Report Settings (Administrator mode)
The conditions for outputting the transmission results report and activity
report can be specified.
Settings can be specified for the following.
Item Description
TX Report
(Single destina-
tion)
Select the conditions for outputting the results report for a transmission to a
single destination.
Output On: Select this setting to output the report, regardless of the transmis-
sion result.
If TX Fail: Select this setting to output the report only if the transmission failed.
Output Off: Select this setting to not output the report, regardless of the trans-
mission result.
TX Report
(Multiple desti-
nations)
Select the conditions for outputting the results report for a transmission to
multiple destinations.
Output On: Select this setting to output the report, regardless of the transmis-
sion result.
If TX Fail: Select this setting to output the report only if the transmission failed.
Output Off: Select this setting to not output the report, regardless of the trans-
mission result.
Activity Report Select whether or not the activity report is outputted with every 50 transmis-
sions.
To Next Page
Loading...
