Oce VarioLink 2221 - LDAP Setting; LDAP Search

3
Setup
3-44 VarioLink 2221/2821/3621
3.11 LDAP Setting
The settings used by the LDAP (Lightweight Directory Access Protocol)
server in a network can be specified.
Settings can be specified for the following.
LDAP Search
1 In the Network Setting screen, touch [LDAP Setting].
2 Touch [LDAP Search].
3 Select whether to allow LDAP
searches.
– If [Yes] was selected, specify the
LDAP server settings.
Item Description
LDAP Search Select whether to enable or disable the address search used by
an LDAP server. When "Yes" is selected, an LDAP server can be
specified.
LDAP Server Setting Register the LDAP server to be accessed. Up to 5 LDAP servers
can be registered in this machine.
Search Default Setting When multiple LDAP servers are registered, select the primary
LDAP server for performing searches.