Oce VarioLink 2221 - Specifying the Internet Fax Full Mode Function Settings (Mode 373)

Specifying management settings
10
VarioLink 2221/2821/3621 10-47
Specifying the Internet fax full mode function settings (mode 373)
You can specify the Internet fax full mode function settings.
Factory settings
Specifying settings
The shaded cells represent the factory settings. The page numbers on the
right refer to the descriptions of the corresponding functions.
Bit 7 6 5 4 3 2 1 0
Setting 0 0 0 0 1 0 0 0 (HEX: 08)
Bit Description Setting Description Page
Refer-
ence
7 Specifies whether to enable
the full mode function.
0No page2-7
1Yes
6, 5, 4, 3,
2, 1, 0
-----------------------------
0001000 *Do not change these bits
when specifying settings for
this function.
---------