7
Internet faxing
7-26 VarioLink 2221/2821/3621
Changing the subject
The subject line of an e-mail message can be selected from subject lines
registered in advance. To specify settings, refer to the Scanner Settings
screen, displayed from the Administrator Management screen on page 3-35.
0 The subject line is printed by the receiving machine when "Yes" is
specified in the RX Doc. Header Print screen.
1 Touch [Menu].
– If the optional fax kit has been installed, touch [FAX Menu].
2 Touch [Network], then [Subject
Selection].
– If the optional fax kit has been
installed, touch [Net.], then
[Subject Selection].
3 Select a subject, and then touch
[Enter].
– Touch [OFF] to cancel the
setting.
Detail
When no subject is registered, the e-mail subject line “[Image File] (one-
touch name), (machine name), (number)” is sent.
To Next Page
Loading...
