Scan to E-Mail
4
VarioLink 2221/2821/3621 4-3
4Scan to E-Mail
4.1 Specifying a destination with a one-touch dial button
You can transmit data simply by touching a one-touch dial button if the e-
mail address of a destination or a mail program has been registered with a
one-touch dial button in advance.
For registering one-touch dial buttons and mail programs, refer to
"Registering destinations" on page 4-31.
Selecting a one-touch dial button
A one-touch dial button can be selected in any of the following ways. Use the
appropriate method according to the number of recipients and the desired
use.
- Directly touching the one-touch dial button
- Entering the number of the one-touch dial button
- Specifying chain dialing
To Next Page
Loading...
