Oce VarioLink 2221 - Specifying the Deleting Method for [Del.] in Input Screens (Mode 478)

Specifying management settings
10
VarioLink 2221/2821/3621 10-59
Specifying the deleting method for [Del.] in input screens (mode 478)
Specify the deleting method for [Del.] in input screens.
Select whether the character at cursor’s position or the character to the left
of the cursor is deleted.
Factory settings
Specifying settings
The shaded cells represent the factory settings. The page numbers on the
right refer to the descriptions of the corresponding functions.
2
Note
North American model default setting: 1
Other model default setting: 0
Bit 7 6 5 4 3 2 1 0
Setting 0 0 0 0 0 0 0 0 (HEX: 00)
Bit Description Setting Description Page Refer-
ence
7 Specify the deleting
method for [Del.] in
input screens.
0 Deletes the character at
the cursor’s position
page 13-5
1 Deletes the character to
the left of the cursor
6, 5, 4, 3, 2,
1, 0
-----------------------
0000000 *Do not change these bits
when specifying settings
for this function.
----------